Elcometer 106 Pull-Off Adhesion Tester

The Elcometer 106 Adhesion Tester is easy to operate and fully portable Type II adhesion gauge which provides a numerical value for adhesion strength. Applications for the Elcometer 106 Adhesion Test include paint or plasma spray on bridge decking, coatings on steel, aluminium, concrete etc. -Supplied in a carry case - ideal for site tests -Hand operated - no need for a power supply -Includes a cutter for EN13144 and ISO 4624 tests

Elcometer 500 Concrete Coating Thickness Gauge

The Elcometer 500 Coating Thickness Gauge accurately measures the thickness of coatings on concrete and other similar substrates* - non destructively. Fast and accurate, the Elcometer 500 Coating Thickness Gauge takes repeatable and reproducible dry film thickness measurements of coatings on concrete up to 10mm‡ thick – without damaging the coating. Taking over 60 readings per minute in standard mode and 140+ readings per minute in scan mode; the Elcometer 500 Coating Thickness Gauge allows users to inspect more coatings in less time. With a choice of intelligent, ergonomic probes, designed for continuous use and field replaceable probe tips you can inspect all day, everyday.

Elcometer 319 Dewpoint Meter

The Elcometer 319 Dewpoint Meter with a robust temperature sensor is designed to measure and record all relevant climatic parameters required to determine whether the conditions are suitable for painting.

Elcometer 508 Push Off Adhesion Tester

The Elcometer 508 Push Off Adhesion Tester is an extremely versatile Type III* adhesion gauge which can be used to test adhesion strength of coatings. Tests can be made on flat or curved (concave and convex) surfaces.

Elcometer 355 Coating Thickness Gauge

The Elcometer 355 Coating Thickness Gauge's watchwords are accuracy, simplicity, versatility and durability making this a true state of the art hand-held measuring system packed with time-saving and cost-cutting features. Available as a standard and top model, the unit’s large memory stores up to 10,000 readings in batches and data can be output to PC, datalogger or printer as required.

Elcometer 212 Digital Pocket Thermometer

Incorporating a fast response stainless steel liquid or surface probe, the Elcometer 212 provides temperature readings in under four seconds. Housed in a water resistant case with integrated rubber seals and a moulded flush window, preventing dirt and leaks damaging the LCD display, the Elcometer 212 is ideal for use in the harshest of environments. The probe conveniently folds back into the side of the instrument, preventing damage when not in use. -Liquid or surface probe options available -User switchable between °C and °F -Resolution can be set to 0.1°C (0.1°F) or 1°C (1°F)

Elcometer 138 Bresle Salt Kit

It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs. The Elcometer 138 Bresle Kits include the Elcometer 138 Conductivity Meter. This lightweight, portable meter measures the conductivity of the test sample.

BLAST NOZZLE HOLDER ( BLASTING )

All nozzle holders are manufactured to fit externally over the blast hose. Internal grip rings bite into the blast hose for a safe and secure fit, and retaining screws provide additional holding power without penetrating the inner hose layer.

AIRBLAST BLAST HOSE

Application: Classic shot blast hose with excellent tube quality for conveying highly abrasive media such as quartz sand, steel shot, corundum, glass, etc. Feature: Very long service life due to abrasion resistant tube. Average wear of the tube 50 mm³ (according to DIN ISO 4649:2014). Antistatic construction prevents the build-up of static electricity. Standard/approval: Exceeds EN ISO 3861:2008. Temperature range: -35°C / +80°C. Safety factor: 3 : 1 Tube: NR/SBR/BR, black, smooth, antistatic, abrasion resistant. Reinforcement: Textile wrapped. Cover: SBR, black, antistatic, cloth impression.

BLAST HOSE (YELLOW) ( BLASTING )

Classic shot blast hose with excellent tube quality for conveying highly abrasive media such as quartz sand, steel shot, corundum, glass, etc. Features: Very long service life due to abrasion resistant tube Antistatic construction prevents the build-up of static electricity

Elcometer 130 SSP Soluble Salt Profiler

The Elcometer 130 Soluble Salt Profiler provides fast and accurate measurement of the level and density of soluble salts - over 4 times faster than other Bresle equivalent methods.

Elcometer 130 Salt Contamination Meter

The Elcometer 130 quickly and accurately measures the level of soluble salts on surfaces over 4 times faster than Bresle equivalent test methods.

Our Partners

Benny Wu Wijaya Wu Willy Wu